GUNSMITHING AND RELATED SERVICES

1.“GUNSLINGER” Deluxe Action Job...$495.00
Our top of the line action job is designed to give you 100% reliability, and is guaranteed for as long as you own the pistol. In accomplishing this you will have the highest level of mechanical integrity. By optimizing every internal part, your Colt will feel like it’s running on ball bearings and yet lock-up like a bank vault. This world-class action job is by which all other action jobs are measured. Enjoy the very best for your Colt. The GUNSLINGER Action Job allows your selection of light or extra light gunfighter springs along with your desired trigger pull weight. Please call for more details.

2.“SADDLE TRAMP” Action Job...$425.00
Our economy level action job offers less hand polishing with the same level of reliability as our top of the line job. This action job comes with light weight gunfighter springs, and optimization of all internal parts. Trigger not tuned or adjusted.This action job is not intended for competition shooting. Please refer to the GUNSLINGER action job above.

“COWBOY SHOOTERS 1880’S PACKAGE FOR YOUR
3RD GENERATION”
Gives your modern Colt that vintage 1880’s look, choose any or all options:
1.Remark Barrel, 45 Colt, etc...$150.00
2.Remark 2 line address (43⁄4"barrels only)...$150.00
3.Reflute Cylinder...$150.00
4.Bevel Cylinder...$150.00
5.Recontour Front Sight (not advised with short sights)...$100.00
6.Bevel Ejector Tube End...$40.00
7.Bevel Heel and Toe of Grip Frame...$100.00
8.Checker Hammer Spur like 1880's w/Border...$125.00
9.Color Case Hammer or Hammer and Frame...$75.00 or $345.00
10.Rust Blue Revolver...$350.00

CUSTOM RECHAMBERING FOR OPTIMUM ACCURACY
We can now provide for the custom rechambering of your .357 magnum or 32-20 cylinders to:
45 Colt, 44 Special and 44-40 calibers.....................$170.00 per cyl.
plus return U.P.S. Allow about 6 weeks. This service is only provided at customer’srisk. We cannot be responsible for accidental tool breakage when boring your cylinder. Let us know if we can help with your custom boring jobs. By boring your own cylinder you can keep the serial numbers matching on your newly calibrated revolver.
NOTE:45 Colt Chambers Measure .452.

3.Trigger Job only. Adjust to your specs, remove creep...$250.00
4.Competition Unloading Chute (not externally visible)...$195.00
5.Cylinder end shake removal (may need to set barrel back
to maintain BBL./CYL. gap. Not included in price...$100.00
6.Adjustable Hammer Stop (not externally visible)...$150.00
7.Firing Pins (Solid) installed (plus parts)...$30.00
8.Firing Pins (Floating) installed (plus parts)...$40.00
9.Recoil Plate installed (Replaced)...$250.00
10.Hammer Cams installed (plus parts)...$20.00
11.Hammer Rollers installed (plus parts)...$20.00
12.New Front Sights milled and fitted (Blueing Extra)...$295.00
13.Front Sights welded higher and shaped and colored...$200.00
14.Barrels shortened and Crowned...$195.00
15.Tune and Time your revolver.
Billed according to average labor time required (parts xtra).$250.00
16.Barrel Stud Milled and Fitted (Parts Included)...$295.00
17.Cylinders fitted....$150.00
18.Adjust Barrel/Cylinder gap to custom specs...$175.00
19.Barrels fitted...$150.00
20.Forcing Cone re-cut to 11°...$75.00
21.Test Fire and Adjust Sights (Windage Only)...$150.00
22.Test Fire and Adjust Sights
(Windage Only) w/o repair job...$175.00

NOTE:We only use Black Hills ammunition unless you provide us with your custom loaded ammunition.

23.Cleaning Services...$75.00
24. Nickel Plate stripped from your Single Action...$195.00
Other plated materials and Copper under-coated jobs are slightly more.
25. Antique-Patina (Brownish) finish applied to old previously refinished revolvers. A pleasing Antique finish...$350.00

26. SPECIAL METAL RESTORATION WORK: This will be our 24th year to offer this service. This work consists of the restoration of blown or dovetailed top-straps,disfigured contours, firing pin apertures, base pin screw apertures and other difficult jobs. Phone for details and an estimate. You will be very pleased with the quality of this restoration work. Restoration work is for historical and collecting purposes only. Restored revolvers are not for firing.

27.REFINISHING: We are pleased to again offer this service to our customers. Finest quality. Our Case-Colors closely duplicate those of the early Colt Single Actions. The Rust-Blue is a very pleasing blue, not black, which is very durable. This Rust-Blue and Case-Coloring work includes total disassembly and assembly after the work is completed. Test firing and adjusting the sights is $100.00 additional. We will not accept any revolvers with original finish to be refinished. We will only refinish those revolvers which have previously been refinished. Please call if you have any questions.

REFINISHING — BASIC PRICES:
a. Case-Color Frame:...$350.00
(Depending on polishing)
b. Case-Color Hammer:...$50.00
(with frame C.C. job)...$75.00 (w/o frame C.C. job)
c. Rust Blue Revolver:...$350.00
(Depending upon the amount of polishing required)

COLT SINGLE ACTION HAMMER NOTCH REBUILDING

1.YOUR EXACT hammer rebuilt.
(Includes new cam)...$250.00
2.COLT BISLEY hammer rebuilt.
(Includes new cam)...$300.00
NOTE: Bisley hammers may require more “hand-fitting” than do the standard frame hammers. If you’re not sure about fitting, ship the entire revolver to us for expert timing and fitting. All of our rebuilt hammers are automatically fitted with new cams, which will insure that your revolver’s action and timing will function properly.
3.Re-checkering of Old Style hammers spurs w/border...$100.00
NOTE: Kindly allow $10.00 per hammer/trigger job for return UPS

INDEX OF HAMMER STYLES

1st Style:1873-1875 Production, Longest course checkering.
2nd Style:1876-1880s Long course checkering.
3rd Style:1890s-1900s Short course checkering.
3-A Style:Early 1900s Bordered fine checkering.
4th Style:1906-1912 Course crescent checkering.
5th Style:1910-1941 (pre-1931 were case-colored) fine knurling.

POST-WAR SERIES

6th Style:1955-1959 High Profile, solid pin w/rampant Colt Trademark.
7th Style:1960s (early) Solid firing pin, Low Profile 25000-33000 SNR.
8th Style:1960s (late) Floating Firing Pin, Low Profile.
9th Style:1970s Floating firing pin, High Profile.
10th Style:1980s High Profile, “P” marked, narrow shank, floating pin.
11th Style:1985 to current production, narrow shank, floating pin.

REMINDER:

Originally all Colt Single Action working parts were hand-fitted.
As there are so many variables found on this revolver, hand-fitting may be necessary in most cases to make your revolver function perfectly. If you experience fitting problems, we will do this work for you at the basic charge. PLEASE INCLUDE A LETTER OR NOTE OF INSTRUCTIONS WITH YOUR COLT REVOLVER. LET US KNOW EXACTLY WHAT WORK YOU WOULD LIKE DONE.

COLT SINGLE ACTION TRIGGER SEARS REBUILD

1.Trigger Sears rebuilt and hand honed
(case-hardened)...$75.00
NOTE: Kindly allow $10.00 per hammer/trigger job for return UPS.

Prices subject to change with out notice

Back to the top...